Features
DCT4.1 / DCT4.5C
Water-release slide-off decal transfer paper for white or light coloured, non-fabric, smooth surfaces.
Suitable for glass, ceramics, metals, wax candles, soap, etc ...
Suitable for materials that cannot fit into a heat transfer press or cannot withstand heat.
Newly developed DCT 4.5C meant for laser printers without fuser oil.
DCT4.6 / DCT4.5W
Water-release slide-off decal transfer paper for dark coloured, non-fabric, smooth surfaces.
Suitable for glass, ceramics, metals, wax candles, soap, etc ...
Suitable for materials that cannot fit into a heat transfer press or cannot withstand heat.
Newly developed DCT 4.5W meant for laser printers without fuser oil.
Specifications
| Size |
A3 / A4 |
| Quantity Per Box |
50 / 100 sheets |
| Media Type |
Plastics, Metal, Glass etc .. |
| Mirror Image |
NO |
Special Instructions
Clean surface of the product before transfer!
Trim transfer to final shape/format.
Place in cold water for about 30 seconds until transfer film releases from backing paper.
Slide the image on the transfer film off the backing paper directly onto the product.
Use Rubber Squeegee to squeeze out the water completely from underneath the transfer film by rubbing over the surface from the center to the sides.
Let the transfer dry for at least 6 hours.
The better you remove all excess water the better your final result.
NOTE !!
The instructions written above are to give you a general guide on how to print
using DCT. It doesn't ensure that this set of operating instructions work
with all kinds of products printed using DCT.
|
|
